How do I fix zebra only prints one label then stops?

Usually a size or calibration mismatch. Set the artboard to the real roll, calibrate the printer, then send one test from the free browser app.

Do I need ZebraDesigner or a paid license?

No. Design in the browser and print with Zebra Browser Print, or export PNG, PDF, or ZPL. No desktop designer seat.

Should I reprint the whole roll while testing?

No. Print quantity 1 until the label looks right, then run the rest.

Zebra only prints one label then stops

Published: August 17, 2026 · 3 min read · Problem

Do this in the free app: app.mylabelmaker.com. No signup. Design the label, then print on a Zebra or download PNG / PDF / ZPL.

One-and-done jobs are usually quantity=1, peel/pause waiting for the next take, or a CSV that only had a header plus one row. Check all three before you redesign. Open the free label maker to do it now.

Good to know: A gap-sense fail can also print one, then error. Calibrate if the second label never starts.

How to fix it

Open the free label maker. No signup.
Set the label size to the exact width and length of the roll in the printer.
Calibrate the gap or black-mark sensor if you just changed stock.
Print one test label. Do not send a whole stack until it looks right.

Batch preview

When a sheet is loaded, the editor shows row X / N. If N is 1, the file is the problem, not the printer.

Print or save

After the test looks right, print the rest from the same design. Save a JSON copy so you can open it again later.

Fix it in the free app

Set the size, print one test label, no account.

Open free label maker